The activities designed into this great-looking play system will develop strong muscles and coordination as well as the imagination. Get the kids out into the fresh air and sunshine for some swinging, sliding, and climbing fun. There's something for everyone and room for all! This metal swing set is constructed of powder-coated steel to resist rusting, and UV-protected polyethylene (HDPE) plastic to reduce heat retention and discoloration. Made in the USA.
| Specification Information |
|---|
| Model Number | 493200 |
|---|
| Style | Free standing (no cement required) |
|---|
| Color | Earthtone colors |
|---|
| Playset Dimensions | 20 ft 10 in x 11 ft 10 in |
|---|
| Required Safety Zone Area | 32 ft 10 in x 23 ft 10 in |
|---|
| Material of Construction | UV-protected high-density polyethylene (HDPE) plastic and powder-coated steel |
|---|
| Features | 5 ft hard-top clubhouse, 9 ft. wavy slide, 2 belt swings, monkey bar, captain’s wheel, and binoculars |
|---|
| Warranty | 10 yr. Limited Factory Warranty |
|---|
| |
|---|
|
Fall height in feet in which a life threatening head injury would not be expected |
|
Material
|
Material Depth (uncompressed)
|
| 6 inches |
9 inches |
12 inches |
| Double shredded bark mulch | 6 ft | 10 ft | 11 ft |
|---|
| Wood chips | 6 ft | 7 ft | 12 ft |
|---|
| Fine sand | 5 ft | 5 ft | 9 ft |
|---|
| Fine gravel | 6 ft | 7 ft | 10 ft |
|---|
| Shredded tires1 | 10 ft | n/a | n/a |
|---|
| |
|---|
|
We recommend using sufficient material for an 11 ft. Fall Height.
This information has been extracted from the CPSC publications Playground Surfacing—Technical Information Guide and Handbook for Public Playground Safety. Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C. 20207 USA or call their toll-free hotline: 1-800-638-2772.
1This data is from tests conducted by independent testing laboratories on a 6 inch depth of uncompressed shredded tire samples produced by four manufacturers. It is recommended that persons seeking to install shredded tires as a protective surface request test data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292.
|
| |
|---|