Stand Alone Monkey Bar Set (Tan and Green)
For generations, kids have enjoyed playing on monkey bars and playground equipment just isn’t complete without them! This commercial grade monkey bar set is constructed of heavy-duty, rust-resistant, powder-coated steel; a strong, durable structure that will keep many generations of kids climbing and swinging! Expand the fun of your playground equipment with this traditional addition; the Lifetime commercial grade monkey bar.
The stand alone monkey bar set includes a ground anchor kit for securing the monkey bars in the ground with cement (cement not included). The monkey bars can also be purchased as a replacement set, but you will need to verify if the deluxe playset you are attaching them to is the same color.
|Style||inground –includes anchor kit|
|Material of Construction||Powder-Coated Steel|
|Dimensions||length 105inches, width 27inches, height 89 inches|
|Weight Capacity||300 lbs|
|Warranty||10 yr. limited factory warranty|
|Fall height in feet in which a life threatening head injury would not be expected|
|Material||Material Depth (uncompressed)|
|6 inches||9 inches||12 inches|
|Double shredded bark mulch||6 ft||10 ft||11 ft|
|Wood chips||6 ft||7 ft||12 ft|
|Fine sand||5 ft||5 ft||9 ft|
|Fine gravel||6 ft||7 ft||10 ft|
|Shredded tires1||10 ft||n/a||n/a|
We recommend using sufficient material for an 11 ft. Fall Height.
This information has been extracted from the CPSC publications Playground Surfacing—Technical Information Guide and Handbook for Public Playground Safety. Copies of these reports can be obtained by sending a postcard to the: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C. 20207 or call their toll-free hotline: 1-800-638-2772.
1This data is from tests conducted by independent testing laboratories on a 6 inch depth of uncompressed shredded tire samples produced by four manufacturers. It is recommended that persons seeking to install shredded tires as a protective surface request test data from the supplier showing the critical height of the material when it was tested in accordance with ASTM F1292.